Problems With Your Tumble Dryer

How to Open Tumble Dryers

On a first glance the inside of a tumble dryer can look confusing and if your dryer is having a problem then you will need to know how to navigate your way through this confusion. In order to open a tumble dryer you need to disconnect it from the power source before you do anything. Once it is disconnected from the power, you need to remove the cover screw that is located close to the lint trap. The next thing you need to do is get a putty knife and insert it into the groove amid on the top and side panels. This step is not required will all models of tumble dryers, with some you may just need force for unfasten a clip dryer repair altadena.

You will need to loosen a front rear panel to obtain access to the front of the dryer. In order to support your dryer, you can place to chunks or bricks near the detached door wires. Once the dryer is lifted off the ground you will have access to the dryers components.

Reasons Why Tumble Dryers Won’t Work

If your dryer is refusing to work, then it can be a number of things. The first thing you should check is if the dryer is receiving current from the power cord or outlet. To see if its getting electricity, you should check different outlets and the circuit breaker. Make sure that the power cord is firmly in the wall and connected to the dryer. If electricity is not the issue, then you may want to look at the door handle. If you need to purchase and replace your new door control, then it can be located near the top or the front of the dryer. If you don’t think that the door is the issue, then you the interior fuse may be your problem. It is located near most exhaust ducts. If the internal fuse is damaged or destroyed, there is no way that your dryer will work.

There is No Heat Being Generated

If your tumble dryer is tumbling but not generating heat, need to test the electricity. Your dryer may be using circuits and fuses, so both would need to be checked. On most dryers with two fuses and circuits, one is for the heat and the other is for the motor. If you purchased a gas tumble dryer, then the heat may not be getting to the dryer. The ignition source may just need a quick replacement. If you know that there is gas in the ignition source, then you should check the pilot light to make sure that its lit. Electricity is most likely the problem in heat related issues, and if you check all electrical sources related to heat, then you will most likely find the problem.

This article is meant to give the basics in tumble dryer repair as well as give you some ideas at what your problem may be. When it comes to fixing your dryer, if you have the ability to fix it yourself, then go for it. However, it is probably best to call a mechanic because tumble dryers can be expensive, and you don’t want to spend money replacing one if you don’t have to.

Dryer Repair Tips

You toss your load into the dryer set the timer and walk away. You return to grab your work pants and get ready only to discover the dryer isn’t performing like it should. Here’s some dryer repair tips to help you get your dryer working again.

If it isn’t working at all there are a few things you can try.

1. No Power

Make sure that the power cord is plugged in dryer repair pasadena. Unplug and plug it back in. Check the breakers to make sure it hasn’t tripped or that a fuse is not blown. You can also use a volt meter to check the plug itself to make sure there is power going to the plug.

2. Door Switch

In the door is a switch or sensor that when you close the door it presses against a lever which then activates a door switch which allows the dryer to start up. If that lever becomes broken the switch can’t activate and then the dryer can’t start. You may need to replace this lever.

3. Thermal Fuse

Almost every dryer on the market has a thermal fuse. This fuse will burn out if the dryer overheats. When this happens one of two things occur. The dryer either completely stops working or it runs but it doesn’t throw any heat. You will usually find this fuse under the vent duck inside the dryer. If the fuse is blown you will want to replace it.

4. Defective Timers

Occasionally the timer on a dryer can be defective so that even if you have turned the dryer on it doesn’t recognize the motion and thus the dryer doesn’t start.

If there is no heat there are a few things you can try.

1. Gas Valve Coils

If the igniter glows but then shuts off before it ignites the gas chances are the problem is a coil that is defective. Replace all of the coils – there are usually at least a couple and sometimes more. It is also possible that the gas valve itself needs to be replaced.

2. Thermal Fuse

If the dryer overheats the thermal fuse will burn out with means your dryer will either not run at all or it will run but not throw any heat. Look on the vent duct inside the dryer – this is where you will normally find the fuse. Replace it.

3. Igniter

The igniter can be defective or because it is so fragile it can easily become broken. You should never touch the igniter except for the ceramic part.

4. Flame Sensor

This sensor is near the igniter and you will need to replace it if it is defective or worn out.

If your dryer blows heat but takes far too long to dry the clothing there are a few things you can check.

1. Vents

Check the vent hose and vent itself to make sure there are no clogs. Lint accumulates inside the dryer and if you don’t clean out the dryer regularly it lands up in the vent pipe itself which reduces the efficiency of the dryer and increases the fire risk.

2. Thermostat

A dryer has a thermostat that regulates the heating cycles and this thermostat can burn out over time or it can be defective. It’s very easy to replace and should be readily available.

If you are a home handyman these dryer repair tips are a great place to start. If that doesn’t work perhaps it’s time to call a repairman. But why not try to save a few dollars first?

How to Find Wood Burning Cook Stoves

Wood was the primary fuel for cooking for thousands of years, until the development of the gas and electric stoves. Before they came along, pretty much all food was cooked over wood. This required some special skills (after all, there’s no number temperature control knob on a wood burner) and resulted in unique tastes and textures that modern stoves can’t produce.

All over the world, people still rely on wood to cook their food. South America, Africa, India and many other areas use wood fires to produce every meal. People in more developed areas are turning back to wood in many cases, as well. They’ve discovered that, while a gas fired or electric powered stove might be convenient, there are some things it just can’t do. Let’s take a look at some of the benefits of a wood burning cook stove, and what you can do to get one of your own kitchenaid stove and oven repair los angeles.

Wood fired ovens are known for their fantastic results, in part because of the smoky flavor they can add, but in part because they get much hotter than a gas or electric stove can. Some people even modify their electric stoves to cook with the cleaning cycle in order to yield the same results a wood fired stove reaches naturally. Pizzas and breads cooked in this kind of environment are springy and crusty, with characteristics that are hard to get with a conventional stove.

Stoves that work on wood also allow you to go off-grid more easily, and are a protection against power outages and supply cutoffs. They work as long as you have wood. They do take up more space in most cases, and tend to heat up the room they’re in more than a conventional stove (one reason that many bread ovens are actually located outside). However, for people who really want the benefits of wood, they’re worth it.

There are a few different options when it comes to cooking with wood. The one you’ll choose will depend on what you want out of your stove. Brick bread ovens and masonry stoves are large, can be attractive additions to the interior or exterior of a home, and are a bit more like fireplaces than other types. There’s a strong chance you’ll need to hire a professional mason to build one, however, particularly a masonry stove. That’s because these are fairly complex to build. Once they’re in place, however, they’re not going anywhere!

Old fashioned Victorian cook stoves and replicas are also available. These are large footed pieces made from cast iron, with a firebox and areas similar to burners. They can be found from antiques dealers and retailers offering replica items. Cast iron pot bellied wood stoves can also be used for cooking, but this isn’t their primary purpose, and they lack an oven.

Online dealers are a great place to start looking for these unusual items, but be sure to shop around. Prices can vary a lot, as can the amount of work you need to do (cleaning an antique stove can be tricky). Take the time to learn about how to use and maintain a stove before you buy, too. Treated well, a wood burning cook stove can be a great addition to your home – as long as you know what you’re looking for.

Dryer Parts – Generic or OEM

Dryer running too hot? Not hot enough? Not heating at all? Taking forever to dry? Sounds like you are going to need some dryer parts. But what the difference between Generic and OEM?

When you are shopping for parts the price should not be the only thing that makes your decision for you. Sure a great price is wonderful but the quality of the parts is really important to.

After all if you save a few dollars but the part lasts for only a short period of time then you’ve save nothing. Remember if the pricing sounds too good to be true it most likely is maytag dryer repair pasadena.

Quality of the parts is also dependent on the manufacturer. Reputable companies produce reputable parts and you can still get a great buy just by shopping online.

OEM stands for original equipment manufacture. That means the parts are supplied by the actual manufacturer of the dryer and they are sold as OEM replacement parts. This is always your best option whenever possible.

Time shows flaws in material and design and as these flaws become apparent the manufacture will modify parts and alleviate any problems that have arisen.

OEM tracks and records failure rates and a host of other information which help them determine if changes need to be made. Even simple parts like washers or belts can have special design needs to provide satisfactory operation. Gone of the days of improvising with a pair of panty hose.

If you decide to use replacement parts on a dryer that still has warranty realize you could void your warranty. If the dryer has an extended warranty you will void this too. So be careful what parts you use on a warranty appliance.

After your dryer is off warranty you might decide you like the savings. In fact some replacement parts can cost as much as half of the OEM part. That’s substantial. And there are many excellent replacement part manufacturers too, even if the OEM’s would like you to believe otherwise.

There are actually a limited number of appliance manufacturers with many mergers between big and small occurring over the years. Today many of them produce products under many different names.

Many times the only difference is cosmetics while the actual mechanics is the same. It pays to do a little research so you know who makes parts for whom.

When buying parts it’s important to be aware of return policies. It’s not unusual to not be able to return parts. Those that do take returns often have a restocking fee of 15% to 20% and many online merchants require an RMA number before they will accept returned goods.

While buying those parts you might consider picking up a dryer repair manual. You can save yourself a lot of time and money by having the directions and it will not only help you do a repair it will help you diagnose a repair.

Importance of A Good Appliance Repair Technician

There are many different problems that occur with large appliances. Listed below are some of the most common problems, and reasons why you need to make sure you’ve hired a good appliance repair technician to fix them.

CLOTHES DRYERS: A clogged dryer vent is a common problem. “My dryer is not heating” is a regular complaint. This actually can be serious. Each year in the U.S. clogged vents cause over 50,000 fires. This is an issue that needs to be handled by a trained repairman who is an expert in repairing clogged vents. With the right appliance repair expert your dryer will be heating up again like the day it was purchased whirlpool dishwasher repair los angeles!

WASHING MACHINES: In many of the new front-loading washing machines, the rubber “boots” (rubber gasket) around the door become moldy. These front-loading machines are super because they use less water, as the water level does not have to fill to the top like in a conventional machine. Most manufacturers’ now offer front-loading machines like Maytag washers, Neptune washers, and Whirlpool Elite washers, however, they are more expensive than top loaders. You don’t want to risk breaking such an expensive machine by trying to fix it yourself. Most appliance technicians have received the proper training to clean the rubber boot of your front-loading washer, taking care to ensure its integrity and to spare you the expensive of replacing the boot. After, the repair is complete, the customer is advised to use an “Affresh” tablet regularly, to abate this problem. If your washing machine is not draining properly, stops mid-cycle, or if the detergent dispenser is broken, our technician can make a house call within a few hours to fix the problem.

REFRIGERATOR: Refrigerators come in different configurations. Those with coils underneath the unit should be cleaned every two or three years. If the coils are on top, they should be cleaned annually. If the coils of your refrigerator are on the back of the unit, dust and dirt on the coils need to be cleaned and removed. If not cleaned regularly, the build up of dust and dirt will cause the compressor to overheat. This will cause the unit to shut down causing the food in your refrigerator to spoil which would be costly.

STOVES / RANGE: Gas stoves have a common problem affecting the “glow bar” (the bake or broiler igniters). These become weak after repeated use and must be fixed in order to ignite the gas-stove element. On electric stoves, the top elements sometimes go out. Removing the elements to clean food out of their sockets can result in the element burning out; sometimes the block gets burned out as well. This is a common problem that a competent appliance repair man will be skilled at repairing.

DISHWASHER: Frequently, a dishwasher’s water valve will get clogged due to minerals in the water. A build up of deposits may also appear on the valve screen. These can, in many cases, be professionally cleaned. Sometimes the valve needs to be replaced. Another customer complaint is that the interior sides of their dishwasher get slimy. The use of white vinegar, while running a dishwashing cycle, remedies the problem. So, if your dishwasher isn’t cleaning properly, or you notice water leftover at the end of a cycle, or the soap dispenser is broken, a good technician should will arrive at your home within a few hours to make the repair.

Dryer Cleaning – How to Clean a Clothes Dryer

Dryer cleaning is not only important to keep your clothes clean but also in terms of ensuring safety for you and your family. It has been roughly estimated that unhealthy cleaning techniques of dryers have been one of the major causes of several cases of household fires in the United States each year.

If you do not clean the dryers properly on timely basis, it is bound to deliver bad performance not just for your clothes but also in terms of its overall mechanism which may cause a shot circuit resulting in accidental fires. Hence proper dryer cleaning and maintenance should be your topmost priority.

Dryers work by producing heat for drying your clothes lg dryer repair pasadena, hence every time you use them a certain amount of flammable material is always present in it, which can be removed only through proper maintenance.

It is always advised that you begin your dryer cleaning by wiping all the dirt and dust particles that are accumulated at the dryer surface after which you can proceed to wipe the pipe interiors with the help of a moist clean piece of cloth. Long length duct pipes can be effectively cleaned only by using a microfiber mop or such other kind of dusting tool that can be very helpful in removing huge amount of lint. You can also try to vacuum the dirt, by using specific vacuum cleaners with upholstery attachments.

People who use dryers regularly must make sure to frequently clean their dryers once in every few months for ensuring proper performance. Wherever your dryer is placed you must always make sure that the ducting is not bent or inappropriately positioned. Fires are easily caused when the when the lint and heat are both trapped in obstructed duct pipes. Removing the lint and dirt from both the directions of the pipe will minimize the risk of any accidental fire in future.

Also keep a watch on the outer exhaust hood to make sure that air is able to pass through it accordingly. Also keep inspecting constantly if a steady blast of air is released while the dryer is still working.

Every time you use your dryer try to keep the lint traps as clean as you can because air blockage between the duct pipe and exhaust hood is the major cause of fire. The combination of lint traps and hot air easily gives rise to immediate fire. Lint buildup also avoids exhaust from escaping. This also results in power energy being used inefficiently; thereby resulting in wearing out of the dryer components on a much faster basis. Hence your dryer will stop functioning properly very often.

Keep vacuuming the area surrounding the dryer once every few days so as to avoid lint building. Keep the dryer surface clean for preventing corrosion caused due to water spills. These spills does not only harm the enameled surface of the dryer but also its plastic knobs and controls. If you want your dryer cleaning to be extremely efficient pay equal attention not just to the internal aspects of the dryer but also its external appearance by wiping its exterior body with a clean cloth every day. This will keep your dryer looking new for a longer time.

Clothes Dryer Repair and Cleaning

You can do two other things with a clothes dryer apart from drying clothes: cleaning and repairing the machine if it breaks down. A clothes dryer is a home appliance, and like your typical home appliance, it needs regular cleaning and maintenance if you want it to do a good job. Clothes dryers are sturdy machines, but that’s not saying they don’t choke and break down sometimes, because they do. Put your helmet on because it’s time to do a little cleaning and repairing samsung dryer repair pasadena.

According to the US Consumer Product Safety Commission (CPSC), clothes dryers are responsible for around 15,500 fires annually.

It is obvious then that you should take good care of your clothes dryer. Continuous use of this appliance allows lint to build up in the machine and along the walls of the hose, where the water drains out. Not cleaning the machine and allowing lint to accumulate over long periods of time, according to the CPSC, cause the clothes dryer to overheat, increasing the chances of starting a fire.

Clean the clothes dryer regularly and make sure to remove all traces of lint stuck in the lint filter. Also, improper venting can cause damage to the machine. A clogged clothes dryer shows the following symptoms: long drying times, noisy operation, clothes that are still damp and hot even after drying, and non-functioning automatic sensors.

Most problems with clothes dryers are related to the heat source or the motor that tumbles the clothes. One way or the other, it isn’t a very good idea to just open up the machine and start poking the parts every which way-you need a professional repair man to do this. These guys will troubleshoot and repair the problem for a small price, free if covered by the warranty. It is always better to be safe than sorry.

Common Signs You Need Refrigerator Repairs

Even though most homeowners don’t stop to think about it that often, home appliances do a lot of work to help a household run smoothly each and every day. One of the hardest working appliances in your home is your refrigerator. Because it works hard 24 hours a day, your refrigerator is typically more likely than other appliances to develop problems and need repairs from time to time samsung refrigerator repair pasadena.

If your refrigerator requires repairs and you don’t spot this need right away, you could end up with a much bigger and more expensive problem on your hands. It’s best for you to be well aware of the possible signs that your refrigerator is in need of a little help. While there are some obvious signs that your refrigerator is malfunctioning, it may not always be readily apparent that this home appliance is struggling. Keeping a watchful eye on your refrigerator will help you to spot the signs that you may need to hire a repair service.

Obvious Signs You Have a Problem

One of the most obvious signs that you need refrigerator repair is if your unit is leaking. If you open your refrigerator to find a pool of water at the bottom of it, then you know something has gone wrong. Before you rush to call a refrigerator repair professional, make sure that nothing in the fridge has caused the pool of liquid. Sometimes, homeowners overlook open containers that have spilled and caused a leak. If you can’t find the source of the leak, then you know you have a problem that needs to be dealt with right away.

Another obvious sign that you need refrigeration repair is if your fridge is making an unusual noise. As a homeowner, you should be aware that refrigerators can sometimes be noisy, especially when they are cycling on and off, and you should be used to certain hums, clicks, and whirs. After living with a refrigerator in your home every day, though, you should easily be able to identify whether your fridge is making an unusual sound. If you hear clanking, hissing, or snapping sounds that you’ve never heard before, then it’s time to call on a refrigeration repair pro to find out what’s causing the problem.

Subtle Signs You Need Repairs

Sometimes, your need for appliance repair isn’t quite that obvious. If your refrigerator is making noises or leaking, then you’re probably aware that you have an issue. However, other cases are more subtle. You should make it a point to occasionally check to ensure that your foods are staying fresh for as long as they should. If you’ve had to start throwing things away before the expiration date, then this could be a sign that your fridge is not keeping your items cool enough and you need to hire an appliance repair expert. It’s easy to note when foods have spoiled completely, but keeping up on how long your foods are staying fresh takes a little more effort. If you’re watchful and check expiration dates before tossing items out, you’ll probably be able to determine if your items are going off early.

Because refrigerators are such expensive appliances, you’ll want to do what you can to ensure that you don’t need a replacement all that often. Learning to pay close attention to your fridge’s performance will help you to identify any problems right from the start and get refrigerator repairs in a timely manner. By doing so, you’ll be much more likely to prolong the life of your refrigerator.

DIY Refrigerator Repairs for Common Refrigerator and Freezer Malfunctions

A broken refrigerator is inconvenient and frustrating. Not only are you not able to store your food at a safe, consistently cool temperature, you’re actually at risk of losing food to spoilage and wasting money buying food you can’t eat before it goes bad. When you’re dealing with a fridge issue, from not cooling enough to overcooling, from leaking to making unpleasant noises, you want it fixed fast.

Before you pick up the phone to call a repair technician kenmore refrigerator repair altadena, know that there are some fridge malfunctions that have easy, DIY fixes. If you have one of these problems, you can take steps to resolve it yourself before spending money on a repair expert. Be aware, however, that tackling more complex repairs on your own isn’t usually a good idea. You might make the problem worse. You might even void the warranty on your unit. Leave complicated, intricate repairs to someone with the training and experience to solve the problem properly the first time.

Refrigerator malfunctions you may be able to fix on your own include:

It’s too cold in the freezer/too warm in the fridge: If the items in your freezer are getting frostbite while the food in your fridge is not cool enough, refrigerator repair might be as easy as closing the fridge door. Your fridge is designed to regulate its internal temperature. If the door is left open even a crack warm air can get inside. That warm air will convince the fridge and freezer to work harder, which can cause the freezer to frost over. That frost buildup can then keep the refrigerator compartment from cooling properly. Unplug the fridge, open the doors, and let it thaw. When it’s clean and at room temperature, plug it back in and, going forward, always check that the doors are completely closed before walking away.

Refrigerator light is out: If the fridge light doesn’t turn on when you open the door, it’s time for a new bulb, right? Probably. But first, check the button that turns the light off when the door is closed. Press it a few times to ensure that it isn’t stuck in the off position. If it clicks properly, but the light doesn’t flip on, visit your local home improvement store to buy a new bulb. Most likely, you can replace it yourself without calling in a refrigeration repair professional.

Fridge is not operating at all: If your refrigerator is dark, silent, and warming up, your first step is to check the power source. Unplug the fridge, wait a minute, and then plug it back in. If it doesn’t turn back on, unplug it again and check your circuit breakers to ensure that the switch hasn’t flipped. A tripped circuit will shut off power to certain outlets, and you can restore power by flipping the switch back to on. You can also test the power in the outlet by plugging in another appliance and seeing if it works. For power problems, call your electrician. If the power is on and the other appliance works properly, it’s time for refrigerator repairs.
Checking these small details yourself can save you time and money even if you are unable to fix the problem, because you can tell the appliance repair technician what strategies you’ve already tried. By crossing certain possibilities off the list, the technician can more quickly pinpoint exactly what’s going wrong with your fridge. The sooner he can solve the problem, the faster you’ll have your kitchen back to normal.

Tips For Maytag Refrigerator Repair

Understanding how to fix a refrigerator when it is not working properly could be very beneficial, especially if you are able to do so without having to all someone to do the job for you. Not only will that save you a decent amount of money, it will allow you to correct the problem as soon as possible. In addition to that, you won’t be stuck waiting for a professional to come look at the problem. If you have a reliable unit like a Maytag, it’s worth repairing because of the fact that they can last for a long time when used properly. So understanding Maytag refrigerator repair is worth the effort it takes maytag refrigerator repair pasadena.

Of course, that’s easier said than done, but by knowing the cause of a couple of common problems you might be able to solve your own. One common problem that people have is they find that water leaks out of the freezer bottom at the same time of the day. If this is happening, then the cause is likely the drain. It might be frozen shut, and that can be fixed by using a hair dryer. In order to get to it, you simply need to open the freezer compartment. Maytag refrigerator repair really can be this simple, but it can also be complicated.

In a lot of cases, there seems like there is a problem with the refrigerator and not the freezer. The freezer may be doing its job while the refrigerator portion is not. When this is the case, it’s usually because the door is not sealing all the way and cold air is getting out, which causes the motor to have to work harder than it should. The simple Maytag refrigerator repair solution is to make sure that the door is closing completely and if it is and the problem persists, the seal may need to be replaced.

Overall, you will find that a lot of the problems associated with Maytag refrigerator repair can be fixed by an amateur. Of course, that doesn’t mean that you’ll be able to solve all your problems, but it will help you to avoid calling a professional when you really don’t need their help.